Posted on

Using The Drill Bit Hole Saw Guide Jig Fixture

Drilax™ Diamond Drill Bit Hole Saw Guide Jig Fixture Vacuum Suction Base with Water Coolant Hole for Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain Guides Holes up to 3 1/4 Inches

drilax-drill-guide-bearings-1

  • Durable Plastic Hole Saw Drill Guide Jig Fixture with Suction Base – Integrated Water Hole
  • Adjustable Plate to Guide All Sizes of Hole Saws up to 3 1/4″ Drill Diameters – Flip the plate
  • 1 Side of the Plate for Drills up to 3 inches, and Flip the Plate for Larger Sizes up to 3 1/4″
  • Use the Guide to Start the Hole – Remove the Guide for the Remainder of the Hole
  • Secure The Guide with Suction Base – Feed Water through the Integrated Hole

 

Drilax Drill Guide - Large HoleSaws

High Quality Plastic Diamond Hole Saw Drill Guide with Suction Cup Base

Product Base Dimension: 6″ x 8″

Maximum Hole Saw Dimension: 3 1/4″

Plate Face A : Holes up to 3 inches

Plate Face B : Holes up to 3 1/4 inches

Flip the plate to switch from Side A to Side B

Perfect Hole Starter for : Ceramic, Glass, Granite, Porcelain or any smooth surface where the suction cup base can hold on to – Including Walls

How to use the Guide:

1. Adjust the sliding plate for the size of the hole saw – drill bit you want to use. Once side of the plate is for sizes up to 3 inches and flip the plate for larger sizes up to 3 1/4″

2. Fix the guide using the suction base exactly where you want to drill the hole. Check the drill guide location and slider position before you start drilling. Measure – check twice and drill once.

3. Using water as coolant, start the hole. You can spray the water or use the integrated hole.

4. Use the guide until the drill bit – hole saw makes an initial mark deep enough to keep the bit in position. You can remove the guide and continue drilling in the same spot.

5. While drilling, keep using water to cool down the diamond drill bit – hole saw. Spray bottle, running water or a small water pool around the hole can be used to cool the tool.

Drilax Drill Guide Small Drill Bits

Here is a video made by one of our previous customers:

4 thoughts on “Using The Drill Bit Hole Saw Guide Jig Fixture

  1. I just received drilax saw guide jig and can not understand how to make a 1/4 inch bit work in this. Please reply or I will have to return thank you.

    1. Thank you buying the DRILAX guide.
      To use the guide with small (such as 1/4 inch) bits, you will need to remove the bearings.
      The guide will still hold the bits in place.
      In addition to removing the bearings, you will also need to switch to the small side of the plate.

  2. I’ve just received my guide and it’s missing rubber bushing. Can you assist?

    1. No problem. Just send us your order number and shipping address.

Leave a Reply

Your email address will not be published. Required fields are marked *