- Wet Cutting Diamond Drilling Holesaw Tool 2 7/8″ – Slightly Smaller Than 3 inches
- This is a very rare size. Save %80 over stores.
- Shank round and size is 3/8″ – Use with standard electric or battery drillers.
- There is no need for a center pilot drill. These tools do not have center pilot drills.
- Do NOT run dry. Diamond Coated Tools will work best if you use water to keep the tools cool.
Do NOT Use Dry – Use water as coolant
2 7/8″ – Diamond Drilling Hole Saw Tool 2 7/8 inches – Very Rare Large Size – Slightly Smaller Than 3 inches
This Tool Does NOT Have a Center Pilot Drill
The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.
Drilax tools can drill 1 inch in depth.
Shank size is 3/8″ – common electric or rechargable drillers can be used.
Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood – plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.
Please use protective gear.
Visit Web Site For Instructions
If you need a drilling guide, just search for Drilax Drill Guide
Our customers saved hundreds of dollars by drilling their own faucet – shower – sink – tile holes and you can do it too.
Item Condition: New
There are no reviews yet.